90mm Stop Chamfered Newel Post with Spigot Dowel

Summary

90mm Stop Chamfered Spigot Newel Post 

Stop Chamfered Newel Posts are designed to fit into either new newel bases or existing newel bases created by cutting down existing posts. Newel turnings come with a 50mm Spigot Dowel on the bottom.

Our traditional Benchmark Stop Chamfered range (click to open in a new window) of stair parts will give your staircase a modern contemporary look. The Stop Chamfered range of stair parts feature 41mm Spindles and 90mm Newel Posts in a choice of different timber types each style offering a distinctive look for your stairs.

All newel posts are supplied ready for you to apply your chosen finish unless otherwise specified.

Choose from the following timbers:

Please note, we only list Pine and Oak currently on our website. Please contact us direct regarding Hemlock, White Primed, Ash and Sapele stair parts.

• Scandinavian Pine – Softwood. A yellowish wood with knots and natural character. All knots are sound and live. Suitable for staining, varnishing or painting
• Hemlock – Softwood. Light brown in colour. Naturally a clear material free of knots, however expect some black streak as natural character. Suitable for varnish, stain, oil or painting
• White Primed – Timber core with high grade primer applied ready for top coat of paint.
• Sapele – Red Hardwood – Red in colour ideal for finishing in polish, wax, varnish or oil.
• White Oak – Hardwood. Light brown clear timber with very small knot if any. Will turn golden brown when finishing in either oil, wax, stain or varnish.

Newel Post Dimensions

Our ranch of Benchmark Newel Posts are available in the following sizes. Please select your required size:

• Full Post measures 90mm x 90mm x 850mm (820mm x 90mm x 90mm for Flat Bottom type) – For use on the landing and at the bottom and top of your staircase  
• Half Post measures 90mm x 43mm x 850mm (90mm x 43mm x 820mm for Flat Bottom type) – Used up against a wall to finish the balustrade.

Newel posts do not come with newel caps. Choose the style of cap you like to finish the post off. All caps listed in this section will fit this post.

Free Stair Planning – Plan your Stairs

Not sure what you need for your stairs?

Send us a plan or photographs of yours stairs and we will be happy to work out the parts you need and supply you with a quote.

Call Blueprint Joinery on 01691 671020 or email info@blueprintjoinery.co.uk

Newel Post Usage

If taking your entire newel post out is not an option then these newel turnings with spigot dowels are ideal. You can cut your existing newel down to create a newel base, drill a 50mm hole in the top and slot one of these posts into place. This is ideal for the DIY’er, saves time and money and gives your staircase a complete new look.

If your staircase turns then you may need an intermediate newel post. An intermediate newel post has two square heads on the top turned section which allows the handrail to go in at one height and come out at another. We have intermediate posts as an option but if you are unsure then contact us and we can provide the correct newel turning for your configuration. 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here

Specification

Stop Chamfered Newel post with Spigot Dowel 

• Full Post measures 90mm x 90mm x 850mm (820mm x 90mm x 90mm for Flat Bottom type) – For use on the landing and at the bottom and top of your staircase  
• Half Post measures 90mm x 43mm x 850mm (90mm x 43mm x 820mm for Flat Bottom type) – Used up against a wall to finish the balustrade.
• Spigot Section measure 50mm in diameter x 80mm length. 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here