Our Full Newel Posts are used on new staircases or when replacing the entire newel post. Can be used at the bottom and top of the stair case - Select type, timber and size from the drop-down box below
Read More£28.50
ITEM IN-STOCK Delivery Within 5 Working Days
FREE
The flat top allows you to select any type of Newel Post Cap to finish the post. If you wish to have a turned cap such as a ball or acorn cap then you will need to purchase a flat cap to fit on the post first then fit the ball or acorn.
Please note, we only list Pine and Oak currently on our website. Please contact us direct regarding Hemlock, White Primed, Ash and Sapele stair parts.
The complete type newel has been designed for new build staircases or to replace your entire newel post.
Complete Newel Posts are supplied in two profiles, each with it specific purpose on a staircase.
The full 90mm x 90mm Full Newel - This is the most commonly used post on most stair configurations. It is designed for the bottom of the stair case, top of the staircase, used as mid posts and corner posts on a landing.
The 90mm Half Newel Post - Used up against a wall to finish the handrail run. This post is fixed by screwing and gluing it directly to the wall using suitable fixings. Screws should be positioned so that they are hidden from view by the handrail.
Find the full range of Stop Chamfered products here (click to open a new window).
Newel Posts are fitted first followed by base rails and handrails.
Remember that handrail heights need to be 900mm.
The bottom post is housed over the stair string (the side of the staircase) and fixed into position fixing through the side of the post and through the string using tapered dowels or suitable wood screws. Screws should be countersunk into the timber so they can be plugged or filled to match the timber.
Top posts and landing posts are fixed using a lap joint to the joist under the floorboards at the top of the stairs and secured using suitable wood screws. Remember to always drill pilot holes into hardwoods.
You can use Zip Fix UT Newel Post fasteners if you prefer. These secure the post to concrete or timber sub floors.
Half newel posts are glued and screwed directly to the wall. Place the screws through the head of the post where the handrail will cover them.
We recommend laying out your stair components to ensure handrail heights are 900mm before you cut any existing newel posts.
Handrail have to be a minimum of 900mm high for domestic staircases.
Handrail heights on the staircase are measured from the front bullnose of a step to the top of the handrail.
Handrail heights on the landing are measured from the floor to the top of the handrail.
Spindles must not allow a sphere 100mm in diameter to pass between two spindles.
If you are unsure, please contact us or your building inspector for new builds.
You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here
Full Square Newel Post - Measures 90mm x 90mm x 1500mm, 1800mm, 2100mm, 2400mm or 2800mm (check product options above for more information).
Half Newel Post - Measures 90mm x 42mm x 1500mm.
Choose from the following timbers:
Please note, we only list Pine and Oak currently on our website. Please contact us direct regarding Hemlock, White Primed, Ash and Sapele stair parts.
You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here
There are no reviews for this product at the moment
Please log in to leave a review
