Select from Pine or Oak Timber Handrails in 3 distinct profiles with matching base rails. HDR Profile, Plain Square profile or the LHR Low Profile. The hand and base rails come pre-grooved to accept any 41mm spindle and include fillet strips to infill between spindles. Select from Handrails, Base Rails or Hand and Base Rail Sets, available in 1800mm, 2400mm, 3600mm and 4200mm lengths
Read More£40.00
ITEM IN-STOCK Delivery Within 5 Working Days
FREE
HDR Heavy Duty Profile Available in Oak and Pine - Handrail Measures 58mm x 58mm Base Rail Measures 62mm x 28mm
Square Profile Available in Oak and Pine - Handrail Measures 58mm x 58mm Base Rails Measure 58mm x 28mm
LHR Low Profile Profile Available in Pine Only - Handrail Measure 62mm wide x 40mm high Base Rail Measures 58mm wide x 22mm high
Select your timber type and handrail length from the drop down boxes above.
Please note, we only list Pine and Oak currently on our website. Please contact us direct regarding Hemlock, White Primed, Ash and Sapele stair parts.
The 41mm Grooved handrails and base rails can be used with any 41mm x 41mm spindle either on the staircase or across the landing.
All Rails come complete with fillet strip/ Spindle Spacers used to fill the gap between each spindle. Spindle spacers are fixed in place with a suitable PVA wood adhesive, available in our shop, and can be pinned into place using panel pins. Panel pins should be sunk into the fillet strip of the rail and filled with a wood filler to match the timber.
We recommend that spindles and fillet strips are glued into the handrail and base rail using PVA wood adhesive. This will give strength and stop any potential spindle rattle.
90 Degree horizontal handrail bends are available to turn your handrail from the newel post back across the landing. These can be created during installation by cutting a mitre in the handrail and forming a 90 degree bend.
Click Timber Stair Parts to find our full range of styles that we stock (opens in a new window).
Handrails can be fitted to and design of newel post with a flat face by either a traditional Mortice and Tenon joint or by using our handrail to newel post fixing kits.
Base Rails are cut to length and fixed directly to the stair string using suitable wood screws
Rails can also be fitted to a wall as a wall mounted rail by using wall brackets designed to fit on the underside of the rail and then to a wall up the stair well or on a landing.
IMPORTANT - Spindles should not be spaced more than 99mm apart to meet current building regulations.
Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles.
Handrail height needs to be a minimum of 900mm. Measure from the floor to the top of the handrail on the landing area and measure from the front of a tread to the top of the handrail on the stairs.
Available in Scandinavian Redwood or Oak
HDR and Square profile Handrails measure
Only Available in Pine
LHR Profile Handrail Measure 62mm wide x 40mm high
LHR Profile Base Rail Measure 58mm wide x 22mm high
There are no reviews for this product at the moment
Please log in to leave a review
