Square Ungrooved Profile Handrail - Select Timber and Length

Summary

Square Ungrooved Profile Handrail 

Contemporary Square Profile Base Rail ungrooved. This product is only available in Pine or Oak - please request a quote for other timber types. 

Square Ungrooved Profile Handrail Measures 58mm High x 58mm Wide 

Select your timber type and handrail length from the drop down boxes above 

90 Degree horizontal handrail bends are not available for this profile however these can be created during installation by cutting a miter in the handrail and forming a 90 degree bend. 

Fixing Handrail to Newel Post 

Handrails can be fitted to any design of newel post with a flat face by either a traditional Mortise and Tenon joint or by using our handrail to newel post fixing kits. 

Rails can also be fitted to a wall as a wall mounted rail by using wall brackets designed to fit on the underside of the rail and then to a wall up the stair well or on a landing

Stair Case Building Regulations 

IMPORTANT - Spindles should not be spaced more than 99mm apart to meet current building regulations 

Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles 

Handrail height needs to be a minimum of 900mm. Measure from the floor to the top of the handrail on the landing area and measure from the front of a tread to the top of the handrail on the stairs.

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here

Specification

Square Ungrooved Profile Hand Rails

• Available in Oak and Pine - Contact us for a quote in other timber types 
• Each rail contains spindle spacer material 
• Handrail Measure 58mm x 58mm 
• Lengths available - 1800mm, 2400mm, 3600mm and 4200mm 
• 2 Part Solid Laminate.

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here